Questions & Conversations

Software Factory & IAM (Installation, Development, Deployment, Integration) | E-learning | Documentation | Community

  • 2,383 Topics
  • 8,152 Replies

2383 Topics

B
Vanguard
BramGVanguard
asked in Questions & Conversations

Reserving space in the taskbar

When using universal on tablets, the space available in the screen becomes increasingly important. We are now in the situation where users go into the factory with the tablet to do various safety checks on various machines. Now we see that tasks are quickly truncated from text+icon to icon, with the display type set to "Icon + text (> text > icon). Yet we see that there is still very much space available in the action bar. Can we soon expect better use of this available space, or can we influence this ourselves with screentypes?More then enough room for tasks  1 pixel smaller, tasks only show icon or go to overflow, while there is enough room for text (and maybe icon) 

1
Mark Jongeling
Administrator
1 month ago
J
Rookie
JohanRookie
asked in Questions & Conversations

Screen types -> Design tab not working in GUI version 2023.1.17

When running TSF with GUI version 2023.1.17 I get this in screen types - design:  Is this a known issue?

1
E
Moderator
11 months ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

lookup combo on web accepts non-listed values

Hi all,I have something weird in my web gui. In the lookup fields, I check in the table 'location’ with a comboThis will show suggestions; When I enter a invalid value, i get prompted and can't save the record. However, on web, I can save the record;  Saved the record, with an error messageBUT, when i check the record, it is not saved in the Db;When I refresh, it's still there. When I change between tabs, still there. In Subjects specified; When I close the table, and open it, it's gone (as it should be). GUI; 2021.2.12.Is this a bug, did something change? What's going on?

1
Mark Jongeling
Administrator
2 years ago
Kasper Reijnders
Kasper ReijndersPartner
asked in Questions & Conversations

Suppress message that system flow is still running

We have a system flow that runs every minute. Most of the time it does not do anything. However sometimes it does quite a lot. This process takes up to more than a few minutes. This is aboslutely no problem. Except that this makes the indicium log file flood itself with ‘procsess still running’ exceptions.  How can we get indicium not to report this? 2023-03-22T11:38:00.3653547+01:00 [ERR] Error scheduling system flow '"flow_export_message"' for application 35. (b95a9b29)System.Exception: An exception occurred while trying to log the start of the system flow. ---> Microsoft.Data.SqlClient.SqlException (0x80131904): <msg id="system_flow_still_running"></msg> at Microsoft.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at Microsoft.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at Microsoft.Data.SqlClient.TdsParser.

2
Kasper Reijnders
1 year ago
Rucha Naik
Rucha NaikPartner
asked in Questions & Conversations

To process zipped files from google drive

Hi ,We have to get the files from the google drive and then process it to get the data from the file.The format of the file is .xml and they are currently zipped.In order to extract the data from these files, I need to unzip them and convert the xml format to JSON format. The data further will be stored in various tables.I learnt from the docs and community that the folder needs to be empty where it needs to be unzipped.The connection to google drive is working and I can get the list of the files in the drive. I tried to unzip these files using the unzip connector (by placing the zip file in the location manually) and connecting the task directly with the unzip file connector, however while testing got error as below :  Process flow: Below are my questions :  How can I store the file into storage location using write file if its still zipped. Is there any document that can guide to create a temporary directory using a GUID and unzip the contents in that directory,as mentioned in below

0
Rucha Naik
16 days ago
tiago
Vanguard
tiagoVanguard
asked in Questions & Conversations

Overlapping menu

Menu of my application in the universal GUI overlaps the main frame like in the screenshot. I´ve cleared cache and browser history of Edge (Versie 97.0.1072.62), installed a clean chrome ( 97.0.4692.99), but the problem still persists. I run windows 11.  Any ideas on the cause and the possible solution? 

2
tiago
Vanguard
2 years ago
B
Rookie
bart loyensRookie
asked in Questions & Conversations

Windows GUI - automatic undo checkbox while on selection magnifying glass

we have some unexpected behaviour on our Windows GUI.  reproduction steps: in a form, move with the “TAB” key onto a selection icon ( the magnifying glass)next, click any checkbox in the same formnext, click any other checkbox in the same form, this click undoes the previous checkbox value change to its previous value. we have this on all forms we tested so far, so we think its not related to defaults or context.any ideas? 

1
Mark Jongeling
Administrator
1 year ago
R
Captain
Roy van UffelenCaptain
asked in Questions & Conversations

Freeze panes

In Excel you have the option to use freeze panes to keep certain rows and/or columns always visible.Is there a way in Thinkwise to keep the first couple of columns always visible in a grid?I would assume to find this within Subject>Components>Grid, but can't find it there.

2
Mark Jongeling
Administrator
2 years ago
A
Captain
Alban_TCaptain
asked in Questions & Conversations

can we programatically manipulate the HTTP status code that is returned by a HTTP connector?

When we receive a json containing data and the task that processes the data fails (incorrect foreign key for example) the response json is always returned with status code 200 OK.Can I change that?I see it is an output parameter but in the documentation isn't clear about if it is editable.

1
V
Moderator
3 months ago
Freddy
FreddyThinkwise Local Partner Brasil
asked in Questions & Conversations

in-app apps using previewer DTAP (how to determine application ID/alias)

We are using more and more additional functionalities that use the oData api's of Thinkwise.. One of the problems is the automatic detection of the API URL.Is there a way to fetch the application using javascript (is it stored in a cookie somewhere?)or is there a way to get it in the end application so we can add the app alias to the URL query paramters?  /#application=esm_dev

2
Freddy
1 year ago
M
Captain
Marc FerketCaptain
asked in Questions & Conversations

Default closed menu in Windows GUI

In our application we use a list-bar menu.To allow users to use the maximum space on their screen we want the menu to be (auto-)closed by default.The user can do this himself by clicking on "Auto hide". The menu will then be automatically hidden/shown.We have found that this can be set in IAM by making an entry in the user preferences at [Global] and leaving the checkbox for menu empty. The disadvantage is that this must be set for each user (possibly with a script). Not exactly an elegant solution.Is it possible to set this at application level in IAM?

1
Renée Evertzen
Moderator
2 months ago
A
Captain
Alban_TCaptain
posted in Questions & Conversations

Drag and drop records never calls the task

Hi, We are trying to implement dragging and dropping of records in a view to change the order of the records.This particular view has 2 primary keys:slaughterherd_id supplyherd_idAs per:In tasks I've created a task and added 4 task parameters: I added the task to the appropriate view and filled the first 2 task parameters: In Subjects I set the following: In functionality I added an empty template to the task as I'm not yet looking at executing the task itself. I just want to see the dialog.When I perform a drag in the view it looks like dragging but the dialog is never shown.I thought to be clever and added an empty DEFAULT to the task to see in the DEBUG if that got fired. But it doesn't….We are a bit lost what could be wrong. In our first attempt earlier this morning we dit get the dialog to show up. We started experimenting on how we can detect the id of the record we drop onto and during that process the dialog just stopped working :( 

2
Mark Jongeling
Administrator
1 year ago
A
Sidekick
Allard LakerveldSidekick
asked in Questions & Conversations

Unprotect branch

How can we unprotect a branch? This branch was protected by accident, and I would like to archive it after merging. I cannot alter the checkbox ‘Protected’. 

2
A
Sidekick
2 months ago
J
Vanguard
Jaycee_CVanguard
asked in Questions & Conversations

Reporting Service not updating report Status

Hi Guys,I’m having an issue with the Reporting Service. Every time I upload a image the reporting service picks it up but it doesnt update the report_status column to 2 after picking it up. It does however update the report_status column to 3 when it cant find a report file. Any ideas what could be causing this?

1
J
Vanguard
1 year ago
Rucha Naik
Rucha NaikPartner
asked in Questions & Conversations

Can we connect and upload a file using SFTP connector?

Hi, As stated in the earlier post from community, FTP connector do not support SFTP.Can we use it now or any other ways to upload document with SFTP? 

1
Mark Jongeling
Administrator
9 months ago
M
MatteoSangiorgiPartner
asked in Questions & Conversations

Synchronization to IAM on 2021.2

On TSF, The syncronize to IAM is “blank”. I cannot add or sync my project to IAM.  My goal is to add my application to IAM and run it on Universal interface

2
M
2 years ago
E
Sidekick
Edwin SaanSidekick
asked in Questions & Conversations

View jpg on mobile GUI shows empth screen when opening

Anyone?We use the mobile interface extensively and 1 of the most used options is to use files and images to communicate. We are a bit struggling with this because not all of the JPG’s (image upload fileds) can be opened on mobile. We can see the thumbnail in the GUI but normally if you tick the thumbail the image can be viewed ‘large screen’.  With some jpg’s we see the thumbnail but when opening a white screen is shown. Can it be the file size of this particular image which is ca. 4,5 MB. It’s a picture create on a Canon Ixux. (As I can see in the image properties) If I upload a new image, from the camera of my mobile (Samsung A40) a jpg file is created as well and this file can be viewed when ticking the thumbnail. I see only a difference in file size…. What could be the cause that the view window is empty. (totally whie) 

2
E
Sidekick
3 years ago
NickJanssen
Sidekick
NickJanssenSidekick
asked in Questions & Conversations

Conditional layout in Cube Chart

Is it possible to create a conditional layout for a cube graph?I am using the Windows GUI and changing the settings in User Interface > Business Intelligence > Cube views > Conditional layout does not have any visual effect.In my graph, I show all days in a month on the X-axis and I want to highlight the weekend days in some way. How can I achieve such a thing?

1
Renée Evertzen
Moderator
11 months ago
B
Captain
Boudewijn
asked in Questions & Conversations

Community - filter conversations based on status

Hi all,I recall there used to be an option to filter conversations on the community based on status, so that you would get only solved questions as search results when searching the archives, or conversely, browse unanswered questions to help where possible.Is that my memory playing games or is the functionality hidden in another place than where it used to be?

2
B
Captain
7 months ago
V
Rookie
vcordovaRookie
asked in Questions & Conversations

Peak Filter Canceling

Hello, I am trying to synchronize the tool but when i run the peak filters, it keeps canceling itself and not calculating all values.  

2
E
Moderator
4 months ago
A
Captain
Alban_TCaptain
asked in Questions & Conversations

Different Project folder specification for test versions

I often run into the issue that the project folder is set to a folder on the customers network which I cannot access from my dev environment.I can change it thru Full Model to a folder I can access but I noticed that when I do a sync to IAM the path in my SF overrides the path in IAM.I would love to see a way to set different path for DEV, ACC/TEST and PROD as I don't want my test data to interfere with production data and vice versa ;)Is there a way to do that? Currently I need to be very carefull that I do not forget to correct it in IAM after a new deploy.

1
E
Moderator
2 years ago
U
Warrior
UshaWarrior
asked in Questions & Conversations

View using the same icon as the table.

 We have a view job_history (using dynamic model) of system versioned table job_detail. I chose two different icons for them. But whenever i run creation, the view is picking the same icon as job detail table.In universal i wanted to show different icon for this view.How can i do it?   Before running creation in Universal :After creation: 

1
Mark Jongeling
Administrator
1 year ago
Hugo Nienhuis
Superhero
Hugo NienhuisSuperhero
asked in Questions & Conversations

Webgui login problems

I have upgraded to 2021.2.14 and I am experiencing problems with the browsericon and two-factor authentication. I have tested some and the following happens: I stop the application pool →  service unavailable I start the application pool and go to the url and clear Cache (shift-F5) → browsericon is reset to TW default, logo is TW default I log in and go to the 2-factor page, which looks like this: I log in and log out, after that I clear browsercache again → on the login page our logo is back, but the browsericon is still TW default.When I downgrade to 2021.2.12 , start the application pool and clear my browsercache it works fine:  The browsericon and logo are both back again after logging out and shift F5.

2
Mark Jongeling
Administrator
2 years ago
Ricky
Hero
RickyHero
asked in Questions & Conversations

How can we show a freshly added record with a top xxx filter on the tab?

Hi,We have a product database in which we force a tab to only show the top 1000 records to overcome performance issues.When adding a record that is outside of that top 1000 filter, the record disappears after confirming the transaction without any notion and shows a whole other record compared to what I’ve just added. (in this case we have a detail tab where we add the record and shows the previously chosen record)Find a record (top 1000 filtered):  Go to detailsAnd add a new record (and watch it disappear and show the previous record with out warning): We’d really like to have the freshly added record remain visible.rgds Ricky

2
Ricky
Hero
2 years ago
B
Rookie
Bart HuizerRookie
asked in Questions & Conversations

Validation: Model folder specification has been phased out (but is no longer present in the project)

After the upgrade to 2023.2. The message “Model folder specification has been phased out and is no longer available” appears at the ‘validate definition’ step, with a reference to ‘c: temp’ . however that file path is no longer in use anywhere in the model. 

1
Mark Jongeling
Administrator
8 months ago

Badges

Show all badges
Terms & ConditionsCookie settings