Questions & Conversations

Software Factory & IAM (Installation, Development, Deployment, Integration) | E-learning | Documentation | Community

  • 2,377 Topics
  • 8,124 Replies

2377 Topics

htimmermans
Captain
htimmermansCaptain
asked in Questions & Conversations

Where does my (answered) question go????

I've seen this twice this week now... I receive an e-mail from the community with a link to the subject, but (even after logging on) I'm told I don't have access. This is fine by me, if the question or idea is no longer relevant and might pollutes the community with unnecessary topics. But if that is the case, please stop mailing about changes when the link is no longer available.... [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/f748328f-8637-430c-9d01-64515ded6e09.png[/img]

4
Moller Toma
Captain
4 years ago
D
Vanguard
Dennis BeerenVanguard
asked in Questions & Conversations

Error caused by display_expression

One column of my table has the column id 'display_expression_1' and it is giving me an error (Invalid column name 'jaar') in the application when modifying a record. The column description in the SF says: "Automatically created with the upgrade to G9.5. Replacement for look-up display expression." There are other display expression columns in the same table which are not causing an error. The only difference between them is that the former column has no 'Expression dependencies' specified. See comparison of both columns below. [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/ce0cd960-f947-4320-a449-838b2aeeef93.png[/img] [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/1e32d2bd-aa63-4ba8-806c-d24c55552359.png[/img] I expect that this lack of dependencies is causing the problem, but cannot find a way to add them. Please advise how I can solve this issue. Thanks!

2
D
Vanguard
4 years ago
E
Sidekick
Edwin van de PeppelSidekick
asked in Questions & Conversations

Is it possible to have Default values in the FilterForm?

Kinda like the defaults concept, where you have the option to supply default values for a property, except you set the default value for the filter, and this value is used when the data is retrieved from the database. For example a date filter like below. The 'expected arrival' filter should be filtered on a date range. E.g. between 'TODAY' and TODAY+7 days. This gives the end user direct information about the filter that has been used. [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/1c3fc37c-8149-4d67-913b-ecb293630c64.png[/img] The default filter on date could be solved with a set of prefiters. Except that the user does not get an indication about the actual date filter that has been used for this filtering, making this a less than ideal situation.

1
Frank Wijnhout
Thinkwise blogger
4 years ago
htimmermans
Captain
htimmermansCaptain
asked in Questions & Conversations

Users in SF (Settings)

Does anybody have a clue what the table "Users" contributes to the SF? I mean, a role can be assigned to a particular user, but what the actual effect is, who knows? The following explanation in the Thinkwise manual doesn't contribute much to my understanding of this particular table: "[i]Provides an overview of the registered users of the Software Factory development environment, including their roles (Analyst, Designer, Developer, Reviewer, Tester). Users are added automatically on first login[/i]." It would be great when a certain user is marked as a "Designer" this would effectively result in lesser menu options for that person. But as far as I can tell, what is entered here doesn't effect anything in a users experience when starting the SF. What I'd like to see is additional roles in the SF's IAM that would give users the tools to be a Designer, Tester, Reviewer and so on, and no more. I could try to create roles and groups in IAM that would result in that kind of functio

1
Jasper
Administrator
4 years ago
Guido Speelziek
Apprentice
Guido Speelziek
asked in Questions & Conversations

Exchange online in combination with SQL Database mail

Hi, we use SQL (2017) database mail to send mail directly from our Thinkwise application. Currently we host a Exchange 2010 SP3 on premise but need to upgrade. I would think it is no problem to upgrade to [u]Exchange Online[/u] but would like to hear if there is anyone who (our his customer) is already using this combination and if there are any points to keep in mind when upgrading.

2
Guido Speelziek
Apprentice
5 years ago
Raj Rozendaal
Sidekick
Raj RozendaalSidekick
asked in Questions & Conversations

Automatically download files in a task

We generate XML files in our system. These files currently can be approached by using a task. We have chosen for a task because we want to log all persons approaching the XML. [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/57d23ca9-0754-412b-8a16-d8da771659b0.png[/img] In this task we see the file name and the option to download this file. After pressing the green download button we have to exit the task by pressing 'uitvoeren'. [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/20948a7d-4022-4c27-9fa0-5f3558d34fcf.png[/img] Is it possible to start the downloading of the document the path is referring to automatically instead of pressing the green download button after we opened the task?

8
Erik Brink
Moderator
4 years ago
P
Warrior
PimWarrior
asked in Questions & Conversations

Filtered lookup

Sometimes we want to make a lookup in which you can only pick items that are not already used. Up till now I have been able to come up with three solutions, the first being a view in which the used items are left out, the second being a view in which these items get an 'in-use' flag where a prefilter takes them out of the lookup. Option 1 is not great since it empties the lookup for all saved records Option 2 works much better, but as soon as the user edits the record, the lookup responds by going empty (the selected item is no longer available for selection) Option 3 create a view with a cross join between the source records and the target records, filtered on items that are in use. This allows perfect use with existing records, from them you can pick all available lookup items and keep seeing the selected lookup item. Problem is though that if you create a record the identity is null, now I can make my view include a null value for the key, but then the prefilter checks for

2
P
Warrior
5 years ago
Harm Horstman
Superhero
Harm HorstmanSuperhero
posted in Questions & Conversations

Tasks and Cubes

Can anyone explain why table task parameters behave different in cubes? It seems like that task parameters are only passed thru for primary key columns. Or are additional settings required for this?

9
Harm Horstman
Superhero
4 years ago
htimmermans
Captain
htimmermansCaptain
asked in Questions & Conversations

Color Picker for Thinkwise Software Factory

I have asked for a tool to convert a RGB color to a value that is used within a Thinkwise application. For other purposes I have used a tool called ColorPic, but the numbers used to store colors when using a Thinkwise application don't match (far from it). It's probably a DevExpress of C# thing Now I am pretty sure I already got an answer pointing to a site or a tool that converts various colors (RGB , HEX and what have you), but I can't remember from whom (or whether it was in TCP, an e-mail or by phone). So if anybody knows of such a tool or a site that does the conversion please share. Colorpic (that can't do the conversion): [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/ccd8cfcd-89f3-4147-9af5-4bb055c84fd3.png[/img]

3
htimmermans
Captain
5 years ago
Dennis van Leeuwen
Hero
Dennis van LeeuwenHero
asked in Questions & Conversations

How to set a default Font and Fontsize on a column with HTML-editor?

Is it possible to set a default Font and Fontsize on HTML-fields in the application? Default the HTML-editor use: [list] [*]Segoe UI (9) [/list] [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/eb32732d-d53c-4b50-a8d7-d48967a1ddfa.png[/img] I would like to use as default settings Calibri Light (10).

3
Anne Buit
Community Manager
5 years ago
Rianne Weide
Rookie
Rianne WeideRookie
asked in Questions & Conversations

Version control using requirements

It would be nice to fill in different priorities for the requirements in the SF. Currently you can select this release, next release or future release. But it does not give you the opportunity to select which release you would like the requirement to be added to the application. This makes it possible to do release planning using the requirements for projectmanagement and could be very usefull creating sprints.

1
Moller Toma
Captain
5 years ago
Rianne Weide
Rookie
Rianne WeideRookie
asked in Questions & Conversations

Requirement status

What is the use of the status for requirements? At this point the status of a requirement is always new and does not change during the whole project. It would be nice to have statusses like: [list] [*]In progress - requirement is being worked on. [*]Approved - The key stakeholder has agreed to the requirement and the developer has agreed that it is possible to create [*]Implemented - Code has been designed and is ready for review [*]Verified - The requirement is tested and is functioning correctly [*]Deleted - An approved requirement is deleted. An explanation is needed of why and by whom the decision was made to delete it. [*]Rejected - The requirement is not approved. The why and by whom it has been rejected is relevant. [*]Deprecated - The requirement is no longer in use and has been replaced by a new requirement. [/list] It should also be possible to filter out all of the requirements based upon the status. This way you can always refer to a certain requirement

1
Anne Buit
Community Manager
5 years ago
Dennis van Leeuwen
Hero
Dennis van LeeuwenHero
asked in Questions & Conversations

Thinkwise Deployment Center - IAM upgrade - 2018.1 > 2018.3

When you use the Thinkwise Deployment Center for the upgrade of a new released IAM-version the deployment center is asking to specify the application folder path and the path for linking the IAM files (for example: Images and Reports). In the manual there is no explanation how you need to define the correct path. When you give the wrong network path the deployment center will automatically create a new folder with his subfolders. [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/8f00e939-c3c0-449b-8bb7-4a4eceea0b0b.png[/img] Up to what level do you need to specify these folder path? [b]For example:[/b] ....\Software_Factory\Application\ ....\Software_Factory\Application\SQLSERVER_IAM\ ....\Software_Factory\Application\SQLSERVER_IAM\2018.3\

1
Anne Buit
Community Manager
5 years ago
K.Bakkenes
Captain
K.BakkenesCaptain
asked in Questions & Conversations

Changing the order of instead of trigger procedures when executing source code

We have a view 'person_look_up' with an instead of trigger (IOT) that inserts records into the view 'relation_address_view' which also has it's own IOT. When executing source code (via a 'Full' upgrade) we get an error because the IOT on the 'person_look_up' is created before the IOT of 'relation_address_view'. [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/ea8eda85-f7d7-4f99-bb3f-62dc0f23affc.png[/img] I tried changing the 'Generation order no' of the views and the IOT procedures but it didn't change anything. View: [list] [*]relation_address_view: generation_order_no = 100 [*]person_look_up : generation_order_no = 101 [/list]IOT procedures: [list] [*]relation_address_view : generation_order_no = 100 [*]person_look_up : generation_order_no = 101 [/list] How do we solve this issue?

5
E
Moderator
5 years ago
Eric Franken
Vanguard
Eric FrankenVanguard
asked in Questions & Conversations

Parameter papersource when using the reporting service

When printing a report using the reporting service there's a parameter for the number of copies to print. I'm missing a parameter to select the paper source (tray). I want to print some document on blanc paper and others on letterhead paper on the same printer. Is there a way to do this? Thanks Eric

6
T
Moderator
4 years ago
R
Hero
RolandHero
asked in Questions & Conversations

web has no access to the application definition

Because we want to serve our web application and Indicium under separate subdomains I changed our IIS setup. Both applications are now in separate document roots that are added to IIS as separate websites. Each site now has its own bindings (domain and port number). The login page of the web application works. However I now get the following error after every login attempt: [quote]There is currently no access to the application definition using the configured settings. Please contact your application manager.[/quote] This happens both with Windows domain user accounts and SQL Server accounts. I don't understand the reason for this error. The ini file hasn't been changed and still contains the right settings for the database server and the database name. Users have write access to the web folder. I followed the deployment guidelines. What could be the cause of this error? It has worked before this change to a multi site setup.

2
R
Hero
5 years ago
Lars Berntrop
Sidekick
Lars BerntropSidekick
asked in Questions & Conversations

Make Idea topics also have subforum selectable

I get you want to gather ideas in the Idea subforum. But why not select that subforum automatically if you select the Idea kind of topic, but make the subforum a subtopic selection, so you can select a topic for the idea. I seem to not understand something since every idea I post is met by a query to repost it as a question...

1
Moller Toma
Captain
5 years ago
Lars Berntrop
Sidekick
Lars BerntropSidekick
asked in Questions & Conversations

Unhide Thinkwise Academy progress

I have several courses at 100%. The my courses view dows not show it.

2
Lars Berntrop
Sidekick
5 years ago
Harm Horstman
Superhero
Harm HorstmanSuperhero
asked in Questions & Conversations

Change the layout of email notifications in the community portal

Can the email notification messages send by the Community Portal be made more focused to the topic? This to make them more valuable to read. The same picture with a man watching his tablet PC, doesn't make sense and is just pollution of my inbox. The title of the topic should be part of the email subject, something like: [b]'New Idea: Apex Refactor and Software Factory'[/b] or [b]'New comment on topic: Home button in Mobile GUI'[/b] The description, part of the description or comment in the body, would be great.

4
Harm Horstman
Superhero
4 years ago
Lars Berntrop
Sidekick
Lars BerntropSidekick
asked in Questions & Conversations

Make create topic visually a button.

'Create topic' is hiding in a big blue patch. please make it stand out. My visual processor marks it as a non-descript label.

3
Anne Buit
Community Manager
5 years ago
Tom van Druten
Warrior
Tom van DrutenWarrior
asked in Questions & Conversations

Bullet points gets black background in gui after change (alter data / run task)

After I alter the data on my document, or run a task my bullet point gets a black background. Does someone know how to fix this issue (is there a themes setting?) or is this a GUI issue? This still occurs in the lastest GUI: 2019.3.20 [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/be7c704b-5e0e-4153-aa54-c865ebf2be73.jpg[/img]

5
Tom van Druten
Warrior
5 years ago
R
Hero
RolandHero
asked in Questions & Conversations

3rd party access and data security

We plan to develop a new part in our application that we want to deploy as a portal for a selection of our suppliers. Our goal is to have fewer phone calls and less email traffic by allowing suppliers to check our supplier orders in our own database and to easily create packing lists from those orders inside our application through an interface we have yet to design. To accomplish this we will have to open up part of our data model to a new supplier role in IAM. How can we ensure that every supplier gets to see only their data and not that of others? I assume this can be accomplished with hidden pre-filters but perhaps there is a better way. Is there a best practice concerning portals in general and data security?

3
Tom van Druten
Warrior
5 years ago
D
Vanguard
Dennis BeerenVanguard
asked in Questions & Conversations

Add a line base on a query to the graph of a cube

Is it possible to add a line based on some queried values to the graph view of a cube. See red line in attached image (Excel example). [img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/9f6f76c2-3708-4fee-b404-dc77aa069470.png[/img]

2
D
Vanguard
5 years ago
D
Vanguard
Dennis BeerenVanguard
asked in Questions & Conversations

Create custom color palette

I don't like the distinction between the colors in the default color palettes (see attached image) and would like to create a color palette myself. I would like to know if that is possible and if it's possible, how it can be done.[img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/ad5d7a9d-3c3c-4e25-bfad-e9eaec800a1d.png[/img][img]https://uploads-eu-west-1.insided.com/thinkwise-en/attachment/84a91001-1a71-4b75-a4e7-aa4f2fb7ec81.png[/img]

4
A
Captain
4 years ago
K.Bakkenes
Captain
K.BakkenesCaptain
asked in Questions & Conversations

Assemblies for deployment

We have a number of assemblies configured on the current development environment. These assemblies need to be passed on to every development/demo/customer/production environment. Last week we've added the assembly HttpConnector to our current development environment. This assembly was also needed in the multiple demo/customer/production environments. It appears that this assembly wasn't automatically created on the different environments. Whichresulted in errors in a customer/production environment. Besides the above assembly we also have more assemblies that need to be passed on to every environment: [list=1] [*]SQLTCPExhItemSender [*]HttpConnector [*]Newtonsoft.Json [*]System_Runtime_Serialization [/list] Is it possible to configure these assemblies to be part of a deployment process? It also raises the following questions: [list] [*]How do we make the assemblies part of the deployment process and prevent manual work? [*]How do we maintain the original .dll files?

2
K.Bakkenes
Captain
5 years ago

Badges

Show all badges
Terms & ConditionsCookie settings