Questions & Conversations

Software Factory & IAM (Installation, Development, Deployment, Integration) | E-learning | Documentation | Community

  • 2,368 Topics
  • 8,081 Replies

2368 Topics

Sulea Ema
Vanguard
Sulea EmaVanguard
asked in Questions & Conversations

Drag and drop - Universal

Hello,How can you make drag and drop functionality work in Universal GUI?  Thank you !

3
Sulea Ema
Vanguard
8 months ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

Origin model version is not set

Hi, Last week I had some issues with a deployment (outside of SF). Because of that I had to delete the latest version, and my merge session with it. My work was still in my branch. Now when I want to merge my branch into main, there is no Origin Model version. When I select other branches (that work fine - merging both ways) - it is set. I assume this is the problem for my error “The INSERT statement conflicted with the FOREIGN KEY constraint "ref_model_vrs_merge_session". The conflict occurred in database "ITP_SF", table "dbo.model_vrs".”  It would be very, very nice to not loose the branch since there is quite some work in it. Any advice is welcome! Blommetje  

3
Mark Jongeling
Administrator
7 months ago
H
Rookie
Heini VenebergRookie
asked in Questions & Conversations

Thinkwise login overruled by caching information of other tabpage (e.g. firefox browser)

In current browsers you can use multiple tabblad. This meand you can login into the thinkwise platform with several usersSituationTabblad 1 login of thinkwise in universal GUITabblad 2 login of thinkwise in universal GUIActionTabblad 1: login as user1 and press loginResult user1 is logged in Next ActionTabblad 2 : login as user2 and press loginResult  user1 is logged in and not user2Logout on tabblad 2 and login as user2 => result is that user2 is now logged in 

3
V
Moderator
7 months ago
H
Sidekick
HJ van DalfsenSidekick
asked in Questions & Conversations

Universal list field selection behavior

Hi,With the upgrade to Universal 2023.2.12, we face some strange issues in the list of a view.When we select some field in record x and with the arrow up or arrow down button we navigate to next record, then the focus of the field sometimes jumps to different column in the next record.So it is switching randomly between column 4, 3, 1, 2, 3, etc It is only not coming for all columns. For some columns, it works normally when navigate through the rows, the same column has still the focus. Any idea why this is happening and how it can be resolved? Thanks

3
E
Moderator
7 months ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

Grid row height in Universal differs

Hi, in my Model Overview→ Branch → Model Settings  I have set the Grid Row height to 22px. In most screens this works; However, in some screens I still get the Universal Default, which is larger. Is this a known issue, could it be me? Anyone also having this? Thanks!Blommetje 

3
Blommetje
6 months ago
SanderAdam
Sidekick
SanderAdamSidekick
asked in Questions & Conversations

How can we emulate an IAM startup task in the Software Factory using the universal GUI?

Hello,For a new functionality we need to edit the startup task that any new user will see. The task is set via an IAM startup task. Now that it needs to be edited we need to be able to debug it in the Software Factory using the universal GUI. Is this possible?

3
SanderAdam
Sidekick
7 months ago
Dennis van Leeuwen
Hero
Dennis van LeeuwenHero
asked in Questions & Conversations

What is the sf_model_vrs_name column for?

Before I formulate a complex question, I am curious what your thoughts are regarding the column "sf_model_version_name" in the entity "sf_model_info"?NULLCurrently, there seems to be no place in the SF to record a version name so this field will initially remain NULL with each generation.Model versions

3
Dennis van Leeuwen
Hero
7 months ago
H
Captain
HarryACaptain
asked in Questions & Conversations

Do defaults work on Formlist?

We’re developing a screen that makes use of a formlist, however we’re struggling a bit with getting a default to work. Is it a known limitation of the formlist that these do not work or are we simply doing something wrong?When looking in the Dev tools at the Network calls I do not see a default being called. The default is really straightforward and should always fill in a value, its something like thisselect @date_column = getutcdate()Would love some help 😁

3
H
Captain
6 months ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

Can't find toolbar

Hi,The topic is closed, but I can't quite figure it out. This topic; https://community.thinkwisesoftware.com/questions-conversations-78/universal-search-and-prefilter-in-screen-4095it says that the Toolbar should be there. My problem is still there, and I still have to solve it.But when I look here; https://community.thinkwisesoftware.com/product-updates/release-notes-universal-gui-2023-1-17-4124#New+screen+component:+ToolbarShould the SF support this from 2023.1I have SF 2023.1 with all the hotfixes. Here; that toolbar.Also, I can't find anything regarding this in the Docs. What am I missing? Or what are the alternatives? Thank you!Blommetje

3
Peter Verwijs
Moderator
7 months ago
M
Captain
Marc FerketCaptain
asked in Questions & Conversations

Control the printer tray to be used with the Print File process action

With version 2023.2, the process action Print PDF has been expanded with a large number of parameters.According to the description, one of these parameters is the printer tray. We would like to use the option to generate reports via Indicium in a process flow, and use this new option (controlling the printer tray). Our production system currently still works with the reporting service.It is not clear from the documentation how exactly the control of the printer tray works. We assumed that this would be functionally the same as with the reporting service, so that in a print job we could also specify the desired tray in addition to the printer (among other things because of the description "Choose which input bin (tray) should be used").Upon inquiry, this appears not to be the case, so we cannot indicate which tray should be used for print orders.This makes switching the reporting service to the new output generation system difficult. Installing multiple "printers" on a network where eac

3
M
Captain
6 months ago
R
Hero
RolandHero
asked in Questions & Conversations

Correct environment variable for user's documents folder in all situations

Our users are logged in through various methods. Some have managed systems, others log in via RDP. Sometimes a user has their files synced with Onedrive, others have a profile folder on a shared drive via redirection. This leads to reports with export to pdf setting being saved in various locations.For a process flow we were able to program one of these file paths by putting a username variable as part of the path but this renders the flow unusable for quite a few of our users. The flow uses a move file action but it often can't find the exported pdf file. Therefor we need a more generic approach.What folder does the export to pdf option use internally to determine where to save a file? I've tried %USERPROFILE%\Documents but already in my own case this leads me to the wrong folder.

3
Eric F
Rookie
4 months ago
M
Sidekick
Marco MaatSidekick
asked in Questions & Conversations

Other Tab Variant for form depending on grid column value

Is it possibe to to change the table variant on a form depending on a value of a column ( for instance category )  ?I have a screen type where theres is a grid on first tab and form and details on second tab. i created table variants for some categories  where i have a different setup for the formand its details. ( other group labels  , different field order )    now when i have selected a record and go to the form tab it shows the default form  but i woold like the formlayout of one of the defined table variants       

3
M
Sidekick
6 months ago
T
Rookie
TurcuPaulAndreiRookie
asked in Questions & Conversations

Image upload

Hello, I have created a basic database image upload functionality and I want to know if there is a possibility to switch from the database blob to azure blob storage depending on the image size. I saw that on the file storage locations you can pre-define a max size in MB.What I want is to have that set up to a limit and if my picture exceed the limit, I want it to be automatically saved in azure blob and not in the database. For example if I set up the file storage location to my database and I set up the limit on 5 MB and I try to upload a picture bigger than that I want the picture to be sent in azure blob storage and not in database.For azure I have also set up a file storage location and I don't know if I can make them work together.

3
M
Moderator
5 months ago
Dennis van Leeuwen
Hero
Dennis van LeeuwenHero
asked in Questions & Conversations

How to debug the issue when synchronizing fails

The synchronize to IAM was failed on the step “Synchronizing: tab_prefilter”. How can I find out the problem?Synchronize to IAM failed 

3
Mark Jongeling
Administrator
6 months ago
H
Rookie
Heini VenebergRookie
asked in Questions & Conversations

Unable to claim application

Frequently I notice the message (snackbar) “unable to claim application” during a login activity. Starting condition: My browser is configured to open a tab-page for my application;Action: I enter my user name and password and press login Unpredictable:  I sometimes get the message “Unable to claim application”. Another time login is going perfectly, without getting this message. I have no clue about the root cause!Settings: My application is configured in the IAM with "max 1 sessions per account" and  with a claim timeout of 1 minuteMy questions are: Does anyone have experience with getting this message  How can I investigate the root cause of getting this message 

3
V
Moderator
6 months ago
Dennis van Leeuwen
Hero
Dennis van LeeuwenHero
posted in Questions & Conversations

Unavailable domain element(s) untranslated

If you make a domain element unavailable, the GUI no longer shows the translation of the element but the database value for already existing records.Element "post_address” unavailable GUI result when element is Available in SFGUI result when element is not Available in SF⭕ I'd like to report this as a bug.

3
Dennis van Leeuwen
Hero
6 months ago
A
Rookie
avanderveldenRookie
asked in Questions & Conversations

block username

Is it possible to block the use of a specific username. We see some hacking attempts with a specific username. Is there an option that username cannot be created? Or can we create a blacklist?

3
Jeroen van den Belt
Administrator
4 months ago
T
Apprentice
timApprentice
asked in Questions & Conversations

missing icons in Web GUI after Software upgrade

Hi,I have an issue in Web GUI after upgrading Software Factory from 2023.1 to 2023.3.I don’t see the icons. On IIS I’ve restarted the application pools already.Anyone experienced this issue ?no icons in taskbar no icons in IAM 

3
Blommetje
6 months ago
J
Vanguard
Jefferson DelacruzVanguard
asked in Questions & Conversations

Keyboard Shortcuts for Grids Universal GUI

Hi, we noticed that keyboard shortcuts are only available for forms in Universal Gui, further reading in a post, a year ago said it was in a backlog, my question is if this is still in the pipeline this year?

3
mperrott
Hero
5 months ago
J
Vanguard
Jaycee_CVanguard
asked in Questions & Conversations

IAM Database performance

I’d like to increase the performance of my IAM database. I’ve already cleared unused applications and the session logs. Are there other types of logs that I could clear to increase the performance?And any other suggestions to increase the performance would really help.  

3
Blommetje
5 months ago
J
Vanguard
Jaycee_CVanguard
asked in Questions & Conversations

Error while opening DevExpress report

I’ve been getting a Insufficient Memory error when opening a DevExpress report. But I only get this error when my application is hosted on Azure Web App Services. When looking at the error log, it looks like Indicium is having trouble with rendering Rich Text. I’ve tested this by removing all the Rich Text out of my report and it works normally.How can I fix this and still use Rich text boxes?  

3
D
Moderator
5 months ago
ElenaTodirenchi
Vanguard
ElenaTodirenchiVanguard
asked in Questions & Conversations

Change the way of how the data is shown

Hello,  I want to make some of the fields, which they are private, to be shown something like this: ******ing.Is there a possibility for that? Thank you  

3
Jeroen van den Belt
Administrator
4 months ago
W
Apprentice
Wilfred BossenbroekApprentice
asked in Questions & Conversations

IAM login : Login failed for user 'test'

I have the same problem as in this post, but in another context.Some info about our application:Built for Windows GUI RDMBS: SQL Server  Dozens of customers will use our application (installed at their SQL server) Users are logging in using ‘Windows authentication’ We're still on IAM/Indicium 2022.2 (planning to upgrade) Indicium is running as a service process, listening on port 5000 What I want to achieve: users log in with their own name, so IAM application roles and rights can be used users do not need to be known in SQL security; so the SQL connection from the IAM application should be handled by either: - a service account; - or a SQL account; - or an application role.Question 1:How can I achieve this for the Windows GUI?Related to this, I created a user with ‘Authentication’ set to ‘IAM', and changed the password.I started the application using an INI file containing "Authentication = iam”. When starting, the IAM login shows but after entering username and password, the error “L

3
Erik Brink
Moderator
4 months ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

Pass message to indicium

Hi, I have a subroutine ‘delete_project’. When I call this, it deletes the project. When a record has Referential Integrity and ‘No Action’, Indicium nicely respond with a base64 encoded message that it ‘ can’t delete due to Related <tablename>’ . So far, all good. However, when I don’t want to delete the project because it has for example a [status] = ‘active’ - so deleting is not allowed. In the gui we can display a message. Or with importing some data from an API, at the end we show a success/failure message; perhaps with a Process flow.  Is it possible - and if so, how - to pass these messages through Indicium? If a user connects with the end-point, it will make a lot more sense then a 422 - unprocessable entity when something is not allowed, or processed correctly.Thanks! Blommetje 

3
Blommetje
5 months ago
Tejo van de Bor
Captain
Tejo van de BorCaptain
asked in Questions & Conversations

Executing procesflows from multiple rows

hi,When I select multiple rows in a grid and execute a templated task, this will be executed once for every selected row. But when I have a table task at the start of a processflow, and start this task with 3 selected rows, the task is only executed once.Is there something I’m missing? I don’t need a multiselectparameter solution, cause the tasks can be executed one by one. I am using the multiselectparameter for another task, can this be interrupting the default handling?

3
Tejo van de Bor
Captain
4 months ago

Badges

Show all badges
Terms & ConditionsCookie settings