Skip to main content

Featured Topics

F.A.Q.

What happens to your ideas?

Your input is very valuable to us. That is why you can share your ideas for improving the Thinkwise Platform. (Last updated: november 2024)Tip 💡Don't...

Idea pipeline (top 25)

Filter by idea status

Filter by product

1967 Ideas

E
Moderator
Erwin Ekkel

Hide role rights in subjects - Applied toClosed

Now the roles have moved to the SF the applied to screen under subjects (or variants) has exploded with too much info.What would help is a pre-filter (hide role rights) that is standard active. This would hide all the table rights, column rights, prefilter rights. This way you will only see the references, menu items etc.

2
Jeroen van den Belt
Forum|Forum|2 years ago
B
Thinkwiser
Boudewijn

SF - make the filter box in the quick bar a combobox with suggestion containsClosed

Quite often I use the filter bar on top of the quickbar. I'd like to just type and press enter, instead of press down-arrow multiple times to get to the item of interest:Is it a lot of trouble to make the filter bar a combobox over the available menu items, so that one can type a couple of letters and press enter? Bonus points for combined combobox and filter capability :-)

3
Jeroen van den Belt
Forum|Forum|2 years ago
E
Moderator
Erwin Ekkel

Add baseline version to code historyClosed

In Code history the first entry is the trunk project where the code was set to reviewed. I understand you don't want each iteration in code history. I would however very much like to have the starting point or the baseline. So if the code was created in version 12 but reviewed in version 15. you get two lines:  update    originated in version 15.    --the version where the code was approvedInsert      originated in version 12.    --the version the code was first created Currently you get this, which is not the truth since development was started in version 12, not in version 15.: Insert      originated in version 15.  

5
Jeroen van den Belt
Forum|Forum|2 years ago
M
Thinkwiser
MaartenThinkwiser

Jump to Templates from Code reviewOpen

Sometimes you are reviewing a template however its a dynamic template so you would want to see how is it assigned is it done correctly for all control procedures its assigned to. Or you would want to view the code from a certain assigned perspective.  So i would love to have the same buttons from code overview on code review to jump to functionality template.

7
Jeroen van den Belt
Forum|Forum|2 years ago
Ricky
Superhero
RickySuperhero

Indicium log cycleClosed

Currently the indicium logdirectory keep on growing with new logfilesIt would be nice to see old files get deleted after a certain period.For example by setting a "max age" parameter and value in the appsettings.json file in the log/loglevel section where indicium will delete the logfiles that have been expired due to the max age. 

3
Jeroen van den Belt
Forum|Forum|2 years ago
K
Apprentice
Kirsten VeenboerApprentice

Forgot password - simpler tokenClosed

When the ‘forgot password’ function is used in the webGUI, a token as shown below is sent to the user by mail. This token is probably very safe, but also difficult to copy in handwriting (correctly), and the safety it provides is does not reflect the functions Zeeman provides to most users.  Therefore, an option to configure a shorter/simpler token would be handy. I was thinking of a 4 digit numeric code, but a 6 digit code (provided by the forgot password function in the mobile GUI) would also be ok.

3
Jeroen van den Belt
Forum|Forum|2 years ago
K
Apprentice
Kirsten VeenboerApprentice

Zoom in/out business proces diagramClosed

A business process diagram can be quite large, a function to zoom in and out would be helpful in maintaining overview while also enabling a view on details.

5
Jeroen van den Belt
Forum|Forum|2 years ago
Remco
Moderator
RemcoModerator

Application active for test checkbox in IAMOpen

A checkbox in IAM by application screen to set the application active for testing would be nice. Only users with for example Administratior rights can open the application so you can test if the application is ready for release.Now you need to set the whole application active. But than every user can acces the application.

5
Jeroen van den Belt
Forum|Forum|2 years ago
Arjan Sollie
Thinkwise blogger
Arjan SollieThinkwise blogger

Use inactive ApplicationMerged

In the past it was possible to enable inactive applications in IAM to be opened by admins. This allowed you as an admin to test a version during the deployment before enabling the version for all the end users.It would be of great help to have such a feature again.

11
Jeroen van den Belt
Forum|Forum|2 years ago
B
Thinkwiser
Boudewijn

Let reset_reachable_objects use my previously entered parameters as defaultClosed

The task to find reachable objects under a menu is a helpful tool to find obscure locations in the application. As drawback, in my opinion, there are quite a few parameters to fill out before one gets to the parameter of interest. After looking up five or six tasks in this fashion, it is getting tedious to select platform, tick shortest path, select tasks and squeeze the taskname of interest in the letterbox. Would it be possible to use my last entry as a default for the next? Mostly, once working on one platform, I would then search for another object on the same platform, or, when finding out something about one object, I would do the same for each platform. Somewhat further fetched: I would love to just enter the object name or translation and let the SF find out that this object only exists as a task and then give me the shortest path on each platform. If the name is ambiguous, the task could come up with comboboxes to refine my query to a specific object type.

5
Jeroen van den Belt
Forum|Forum|2 years ago
Freddy
Thinkwiser
FreddyThinkwise Local Partner Brasil

Maintainability of code in SF modelClosed

I would like to see expression fields, customer pre-filters and other in-model expressions to automatically generate some sort of subroutine and template. Where alle code can be accessed from functionality and errors in these expressions can be fixed more easier without model syncs et cetera. 

5
Jeroen van den Belt
Forum|Forum|2 years ago
Freddy
Thinkwiser
FreddyThinkwise Local Partner Brasil

BI: Pivot with only selected values for graphClosed

Hi. I would like to see some extension to the BI functionality. It's becoming more important and the defaults are lacking functionality. One option that would really help is to have a pivot with multiple dimensions and values but to choose only specific values and dimensions for the chart. Because the charts are not really suitable for multi dimensional views and for example 2 different values (as there is not support for a different left and right axis-scale. So this Idea is to have:One pivot with a chart only on a selected dimension and value(s).  And with some support from here have more options to show more data points in one chart.. so different left/right axis-scales for example .. 

3
Jeroen van den Belt
Forum|Forum|2 years ago
T
Vanguard
Timothy MentowidjojoVanguard

Procesflow change filter/ prefilters with open as floating document not workingOpen

Hey all,i have a procesflow that opens a document which then uses change filter/ prefilters to filter on a specific id, however it does not work if i have the option open as floating document set to Yes. When i don’t open it as a floating document it does work. Btw this only happens in universal Is this a bug?

7
Erik Brink
Forum|Forum|2 years ago
M
Vanguard
MatteoSangiorgiVanguard

SMTP Connector - Read receiptClosed

Is there a possibility to have a “read receipt” variable to SMTP connector?  

4
Jeroen van den Belt
Forum|Forum|2 years ago
M
Rookie
Math HuntjensRookie

Indicium extension of the OPENID PROVIDERS definitionClosed

We would like two additional parameters (acr_values, display) for the OPENID PROVIDERS definition in the Intelligent Application Manager (or indicium/appsettings.json). We need these paramaters for the eIDAS integration (openID provider) as part of the multi-factor authentication in our solution. See the example below:https://*************/AutentIDConnect/npa/authorize?scope=openid&response_type=code&redirect_uri=https*************&client_id=*************&acr_values=http://eidas.europa.eu/LoA/high&display=no_eidas_country_selection Some background information on openID standardhttps://openid.net/specs/openid-connect-core-1_0.html#AuthRequest 

4
Jeroen van den Belt
Forum|Forum|2 years ago
E
Sidekick
Edwin SaanSidekick

Multi line in gridCompleted

For several purposes it can be wishful to to have a multi-line field in the grid. It can save space on your forms if you can see the full text of a memo field at once in the grid.At this moment only one line is displayed and it can not be line-wrapped.So I would suggest to create this feature.  

9
Jeroen van den Belt
Forum|Forum|2 years ago
J
Vanguard
Jefferson DelacruzVanguard

Define field height for multilines in grid similar to forms for Universal GuiMerged

Hi Everyone,In our development in Universal Gui, we have some cases where we need to put large chunks of strings in grids or just some small group of texts that we need to squeeze between the columns. It would be nice if we have the option to define height for fields similar to what we have in forms.form field height I understand that modifying such property would apply to the whole line of record, Which I think makes sense. It would be nice if it would be intelligent enough for it to apply only when necessary. One record in with one column having big height.Wrap text option that will squeeze the text inside a column width.Having this with us will make records that are long be more identifiable with one look for users.I have read some ideas regarding row heights by modifying the Model Settings, but they tackle more on the general look of grids. What I’m showing with this idea is row height be applied to records that need them but not to all pages that don't need them, making this more flexible.

4
Jeroen van den Belt
Forum|Forum|2 years ago
R
Thinkwiser
Roland van AggeleThinkwiser

Use LLM to give an overview of new features added between two versions of the platform.Closed

LLM can be used to analyse new features available between two versions. This can be derivede from our docs pages. This questions pops up evry time we want to upgrade a client to a new version. Only today I got this question for a upgrade from 2017.X to 2023.3 and for an upggrade from version 2021.3.

4
Jeroen van den Belt
Forum|Forum|2 years ago
H
Sidekick
H. LukassenSidekick

Ability to use the filter in a process streamClosed

Ability to use the filter in a process stream  

8
Jeroen van den Belt
Forum|Forum|2 years ago
Arjan Sollie
Thinkwise blogger
Arjan SollieThinkwise blogger

Configure domain element first database valueClosed

When you add a new domain and start adding elements to this domain, the Software Factory will automatically give the first element the database value 0. When using a numeric or integer domain and elements I personally am not a fan of using the database value 0. The value 0 indicates empty and is a value I often use in an ISNULL statement. This is way I prefer starting with value 1 instead of 0.Currently there is no way to change this default value. I would like this to be a project version setting.The reason why I would like to configure this is, prevent that co-workers in my team by accident will use value 0 instead of 1 and create an inconsistency.

3
Jeroen van den Belt
Forum|Forum|2 years ago
Arjan Sollie
Thinkwise blogger
Arjan SollieThinkwise blogger

Option to disable rights to non accessible objectsClosed

A cool addition to IAM would be a task that allows you to disable all objects for a specific role which can not be accessed from within the application. This will allow you to disable objects that the user in theory could/should never be able to access.This will help prevent that users by accident have rights to tables which they should not have access to in the first place.They will not access the tables using the GUI but will be able to access them using a tool like MS SQL Management Studio or Indicium. This task will help you prevent this.

3
Jeroen van den Belt
Forum|Forum|2 years ago
Robbert van Tongeren
Thinkwise blogger
Robbert van TongerenThinkwise blogger

generated by control procedure from base modelsOpen

Having a couple of different base model linked to different work models we come across a small problem. After generating the “generated by control procedure” field is populated with the text “Copied from base model”, in my opinion it would be very useful to see from which base model this is copied, could this be added? Now we have to search the different base model, this would help a lot!It could be shown as something like this:"Copied from base model (MODEL)”

2
Jeroen van den Belt
Forum|Forum|2 years ago
Kevin Horst
Thinkwise blogger
Kevin HorstThinkwise blogger

'Copied from base model' doesn't give me enough insightsMerged

 Some parts of your model can be created thanks to a dynamic model or from a base model.When it's created as part of a base model the text 'Copied from base model' is show by the generation info.  Not only is the label 'By control procedure' not fully correct but the data doesn't give me enough insights, because sometimes there is something wrong in the base model and I want to fix that.But then you have to answer the question in which model do I need to fix that? Which you can from the user interface......Now i need to go to the database, query the right table to look for the object and search for one record that isn't generated. Lot of work and not doable for every developer. It would help me if the value in the control procedure would display: 'Coped from base model: {model_id}'  

1
Jeroen van den Belt
Forum|Forum|2 years ago
mperrott
Hero
mperrottHero

Cell based double-click in Grids instead of whole row in UniversalCompleted

Right now Universal grids support Double-Click in grids to start a task/process flow for a whole record/line.In case we have multiple Tasks that are available to be executed for a row you cannot link the double-click of the row in the grid but we need a cell based assignment for the double-click. We require that we have a double-click functionality cell based. Meaning a certain task/process flow can be linked to a cell and upon double-click the task takes the related parameters from the row it is in. 

11
Mark Jongeling
Forum|Forum|2 years ago
J
Vanguard
Jefferson DelacruzVanguard

Add option to Open Document to open as pop ups like lookupCompleted

With the new feature open document as floating popup available in Univeral Gui, it's nice to follow it up with another option to emulate lookup popups. Current ‘Open document’ processThe reason for that is in lookup popups, when it's opened it's the only focus of the page. Other components are un interactable, hence the grey background. Making the page opened needs precedence and attention from the user. Lookup Pop upWhile in the current one is that users can still interact with other components of the page. I understand that the choice was made because opening a page is the output of the process and lookup pop ups are pages opened while being inside a process like editing or adding a record. Open Document Pop up 

8
Mark Jongeling
Forum|Forum|2 years ago

Filter by product

  • All products
  • Community
  • Deployment Center
  • Documentation
  • Indicium Service Tier
  • Intelligent Application Manager
  • Mobile GUI
  • Software Factory
  • Thinkstore
  • UI/UX
  • Universal UI
  • Upcycler
  • Windows GUI
  • Testwise
Terms & ConditionsAccessibility statement