Product updates
Ideas
Groups
E-learning
Documentation
Events

Community
Thinkwise Platform
Questions & Conversations

Questions & Conversations

Software Factory & IAM (Installation, Development, Deployment, Integration) | E-learning | Documentation | Community

1,911 Topics
6,608 Replies

When you subscribe we will email you when there is a new topic in this category

1911 Topics

Most views

Recently active Most replies Newest first

Timothy MentowidjojoRookie

asked in Questions & Conversations

Is it possible to have prefilters on hidden in default and off hidden in variant?

Hey all,i have 2 filters, one gives me only records where the activity_kind is equal to 10 and the other gives me records where activity_kind is not equal to 10This is how it is configured in my default table:In this case it should only give me records where activity_kind is not equal to 10This is how it is configured in my variant:In this case it should only give me records where activity_kind is equal to 10When i have everything configured like above^ everything works fine..However i want them on hidden, but when i put the show_not_parcel_delivery_kind on on hidden in my default table it doesn’t give me any data in my variant.Does the state of the filter carry over to the variant if it’s on on hidden? Any idea what the issue could be?Thanks!

9 days ago

FreddyThinkwise Local Partner Brasil

asked in Questions & Conversations

Indicium - Initial connection takes a long time.

What can be the reason that the initial connection takes seconds… I have another query that runs 5 ms direct on DB.. and this time I see that it stays for seconds in initial connection. and after 6.7 minutes it's done..

1 year ago

BlommetjePartner

asked in Questions & Conversations

lookup combo on web accepts non-listed values

Hi all,I have something weird in my web gui. In the lookup fields, I check in the table 'location’ with a comboThis will show suggestions; When I enter a invalid value, i get prompted and can't save the record. However, on web, I can save the record; Saved the record, with an error messageBUT, when i check the record, it is not saved in the Db;When I refresh, it's still there. When I change between tabs, still there. In Subjects specified; When I close the table, and open it, it's gone (as it should be). GUI; 2021.2.12.Is this a bug, did something change? What's going on?

1 year ago

BramGSidekick

asked in Questions & Conversations

Retrieve Thinkwise installation package through odata call TCP

At this moment its not possible to download the Thinkwise installation package from TCP via Indicium. This results in 'An unknown error occured, please contact your adminstrator’. We would like to download the Thinkwise Installation Package through an Odata call, but we cannot seem to get it to work. It would be great to automate the process of upgrading our Thinkwise stack (universals, indiciums, IAMs and maybe even the SF). Is there any way right now to automate the process of retrieving the installation package or are there any ideas to enable this in the near future?

7 months ago

tiagoVanguard

asked in Questions & Conversations

eurbanVanguard

asked in Questions & Conversations

enter in Universel

Form in edit mode Universel it is not possible to go to next field with <enter> only <TAB> .how can I change this.

8 months ago

mperrottHero

asked in Questions & Conversations

Increasing Password strength to existing Live System

Hi All,Few questions to password strength change.I would like to know if by changing the password strength from 3/5 to 4/5 on live system, will it create any issues to users?Will the users be forced to change password to match the new strength or will it be enforced next time they arechanging password?Thanks

2 years ago

Harm HorstmanHero

asked in Questions & Conversations

No persistent storage location for dataprotection is configured?

What can we do to get rid of this warning in Indicium?The customer's environment is on-premise.We cannot find a simple solution for this in the documentation.

8 months ago

Edwin SaanSidekick

asked in Questions & Conversations

Use log IAM only 1 user

Hi,In the use log in IAM I can see the use_log_sessions by many users.Only 1 user does have use-log_actions?How can I turn on the logging for other users?And can I query the number of times a task is used by a user?I can see some data but this is more than 1 month ago. select * from use_log_usr_action where project_id = 'serp'and usr_action_type_id like '%task%'and project_vrs_id in ('1.54','1.55','1.56','1.57','1.58')order by date_time desc

11 months ago

MatteoSangiorgiPartner

asked in Questions & Conversations

Enable user preferences on Windows GUI

How do I enable User Preferences for my application?It depends on .INI file? or some flags on IAM? or depends on Thinkwise Windows GUI version?

8 months ago

Hugo NienhuisHero

asked in Questions & Conversations

webgui 2022.2.19 layout not working - bug?

We have updated our desktop and webgui to 2022.1.19. The old webgui was 2022.1.16.We have a problem with the webgui.When using ctrl + to add a new record without saving the previous record, several fields ar not visible anymore, where they were in the old webgui. We checked the lay parameters using the debugscreen, and the fields should be visible according to the value of the parameter (@jrn_debiteur_type = 0 and @jrn_debiteur_mand = 1). In the Windows gui the fields are correctly shown. Also, when we first save the previous record, and then add a new record, there is no problem. In the old webgui we also didn't have this problem. Looks like a little bug to me?

11 months ago

Balazs SzederRookie

asked in Questions & Conversations

Autorefresh after uploading a document

Hi there,On our attachment table, whenever we upload a document - which will be first scanned by an antivirus - have to refresh manually before we can see the successfully scanned file.What I would like to do is, to initiate a 5-second timer and after that reloading the table. Trying to make my with a Process Flow. I am open to more solutions!Kind regards,Balazs Szeder

8 months ago

mperrottHero

asked in Questions & Conversations

Is it possible to have Multiple instances of the same Process flow running in parallel by calling it as API?

Hi,As per the subject question: Is it possible to have multiple instances of the same Process flow running in parallel by calling it as API? I want to be dynamically calling the process flow as API to start as many instances as needed to handle the full set of records. Each set will be assigned a group number to identify the different set, and this will be passed in as input to the API call for starting and processing the group set. If dynamically starting of multiple instances of the process flows is not possible I will be forced to create a dublicate of the same process flow hardcoding each group set and will not be able to dynamically call as many as I configure.

10 months ago

Tejo van de BorWarrior

asked in Questions & Conversations

Treeview editable on second click

hi,we are using a treeview with drag n drop, but when clicking sometimes twice on 1 entry, the description field is ‘open’. It’s not editable though, but you have to click outside the box to exit. Can this behaviour be set somewhere?

10 months ago

Roy van UffelenCaptain

asked in Questions & Conversations

How to load filename without actually uploading a file

Our customer just wants to add a filename to the database without actually uploading the file itself.I get the impression that if you want to select a file and then retrieve its filename, you automatically have to upload the file.Is this impression correct? Or how can I get a filename (with or without path) by selecting a file without actually uploading the file?

2 years ago

RickyCaptain

posted in Questions & Conversations

Process flow designer

Hi,Is there a way to show which visual object uses which process action? Currently I cannot see which one is which because they all have the same name (Convert JSON to XML) :Also - selecting a visual object does not hilite the process action in the left pane - can I turn that on somewhere?rgds Ricky

2 years ago

Amel RamulicSidekick

asked in Questions & Conversations

Skipping to next column using tab key?

Is there a way to skip from column to column using a way like the tab key?When i press on the tab key from “Plaatnr 1” it jumps over to the “St lengte 1” button but i want it to jump to the next column “Plaatnr 2”. (the enter key does the same thing as the tab key for me)

2 years ago

Harm HorstmanHero

asked in Questions & Conversations

WinGUI en WebGUI 2021.1 not found?

I want to start with SF 2021.1 and see if I can upgrade an existing application.If it works the same way as with version 2020.2, it will be fine.However, what strikes me is that the WinGUI and WebGUI 2021.1.XX is missing in the installation package.Is it coming soon, or can it continue to use the 2020.2 version of the GUI'ss for the time being?

2 years ago

H. LukassenSidekick

asked in Questions & Conversations

Process flows =>report variant

Can we have the translation of the report variant displayed in the design screen so that I can see the correct order?Have created 3 variants of the reports.

1 year ago

Roy van UffelenCaptain

asked in Questions & Conversations

Freeze panes

In Excel you have the option to use freeze panes to keep certain rows and/or columns always visible.Is there a way in Thinkwise to keep the first couple of columns always visible in a grid?I would assume to find this within Subject>Components>Grid, but can't find it there.

1 year ago

Hugo NienhuisHero

asked in Questions & Conversations

different email login lay-out 2FA

We are sending e-mail to users with 2FA. However, sometimes these emails are sent using correct html and sometimes they are sent as plain text. See both images for the difference. Both have been sent on the same day, different users, from the same email provider using the same application and therefore also the same configuration.Where does this behaviour come from? Do I have to look at the email provider, our system administrators or is it something within the TW application? We are using Office365, TW platform 2021.2, webgui 2021.2.17 all hotfixes applied until 20211001 - Exclude deeplink process flows.

1 year ago

Harm HorstmanHero

asked in Questions & Conversations

Cannot sign into Indicium via browser, connection not private

Indicium is running, but for some reason I cannot sign to do API calls.Is it because it is http instead of https? We are testing in a local environment.

8 months ago

Page 72 / 77

Badges

Dylan.hagmolenhas earned the badge Preparator
Henk-Jan van Laarhas earned the badge Eye-opener
NickJanssenhas earned the badge Geek
Dylan.hagmolenhas earned the badge Geek
grooshas earned the badge Preparator

Show all badges

Terms & Conditions Cookie settings

Sign up

Already have an account? Login

Login to the Thinkwise Software Community

Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.

Username or e-mail

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.