Questions & Conversations

Software Factory & IAM (Installation, Development, Deployment, Integration) | E-learning | Documentation | Community

  • 2,343 Topics
  • 7,986 Replies

2343 Topics

R
Captain
Roy van UffelenCaptain
asked in Questions & Conversations

Adding fonts to model

Default there are a limited number of fonts available in the SF.How can I add other fonts and where can I obtain those?Is there anything I need to do to synchronize these fonts to IAM or other environments?

1
E
Moderator
3 years ago
R
Superhero
René WSuperhero
asked in Questions & Conversations

Approve a set of translations each branch? "Translation is unverified"

We've recently updated to SF2021.1 and I noticed the following validation continiously returned:Even when I approved the translations, merged to trunk, created a new branch from the trunk, the new branch also contains this message. I found out the translations are not approved in the base project “GUI_TRANSL”. Is it save to approve them there? I didn't expect to approve new translations according to the upgrade blog. https://docs.thinkwisesoftware.com/blog/2020/11/26/2021_1.html#upgrade-validations​​​​ 

3
Jeroen van den Belt
Administrator
3 years ago
R
Captain
Roy van UffelenCaptain
asked in Questions & Conversations

Startup menu-item, task or process flow

I get the impression that it should be possible to automatically start one or more menu-items, tasks or process flows, but have no idea how to do it.For now I want to start with a pop-up that gives the user some information about the application, with a tick-box (lower left corner) that the user can check and prevent the pop-up from showing in the future.Please share with me how to automatically perform such an (or any) action on starting the application. And maybe even configure how to disable this.

1
Mark Jongeling
Administrator
3 years ago
B
Rookie
Bram GRookie
asked in Questions & Conversations

Close document starting point process flow

Hello, if i look at our docs page, the following is stated: "The ID of the document that has to be closed. If this process action is not a start action, then the value of this parameter will be used to determine which document must be closed. "https://docs.thinkwisesoftware.com/docs/sf/process_flows.html#close-documentFrom this you can deduce that a close document step can be modelled as a start action of a process flow. But I cannot get this to work. Is this possible or not?

4
M
Captain
1 year ago
Hugo Nienhuis
Superhero
Hugo NienhuisSuperhero
asked in Questions & Conversations

webgui input problems

In our application we have several tables where we want to select a customer. After pressing ctrl + we can select the customer from a lookup field. We have noticed that on many occasions after typing the first 2 or 3 characters, the field refreshes (?) and the cursor is back at the beginning of the field. That results in the problem that when we want to type 123 the input is 312, see screenshot.We have tried to evade the problem by starting with the focus on a different input field (datefield). To our surprise the focus was set to the customer select field in stead of the date-field. After removing the def-statement that fills the datefield, the focus was on the datefield after pressing ctrl +. In the last situation we also have troubles typing a date: sometimes the webgui doesn't respond to typing anything, sometimes we can enter one character and then it stops.We do not have this problem with the desktop gui. We are using platform 2020.1 and webgui 2021.1.10.0.How do we solve this pr

6
Hugo Nienhuis
Superhero
3 years ago
mperrott
Hero
mperrottHero
asked in Questions & Conversations

Page Redirect Mechanism within IAM

Is there a page redirect Mechanism within the IAM to place a message when the published application is down, either for maintenance , platform upgrade, application upgrade etc….What I’m looking for is a way not to go manually and replace the index.html file of the Universal GUI with another  that has as an example message  ‘Be Back Soon, we are upgrading our systems’ and then also bounce the App service.Our published application will be accessed from all timezones and keeping such activities to certain time frame will not be possible as there will always be someone wanting to access the App.

1
R
Superhero
3 years ago
R
Superhero
René WSuperhero
asked in Questions & Conversations

IAM 2021.1 on Universal

I've upgraded IAM to 2021.1, according to the release notes it should be compatible with the Universal GUI: https://docs.thinkwisesoftware.com/blog/2020/11/26/2021_1.html#intelligent-application-managerBut I see a lot of http 404 results in several screens. For example Authorization > Users. When the usr_id contains a special character like a \ (backslash) or @ it cannot execute some http calls for the ‘layout’ and ‘context’. Same applies for user groups containing spaces. Backslashes and @ are often used for e.g. windows domains or email addresses.http://server/indicium/iam/2098/usr(usr_id='user%40company.com')/layout() for example is not working. When you change the %40 in the browser url to @, it works.I also notice when I’ve added a user (user@company.com) a 400 error with the following request: http://server/indicium/iam/2098/usr?$orderby=usr_id%20asc&$deselect=password_hash,profile_picture_data&$select=usr_id&$skip=0&$top=100&$eager=profile_picture&$cou

8
Jasper
Administrator
3 years ago
R
Superhero
René WSuperhero
posted in Questions & Conversations

Display name application for branches

I've upgraded from SF 2020.2 / Indicium 2021.1.11 / Universal 1.8 to SF 2021.1 / Indicium 2021.1.13 / Universal 2021.1.11 and I noticed that the application names in the Universal GUI no longer contain the branch names when starting the Universal GUI against SF (without any application specified):One of them (or both) are branches. Previously this was different and more clear. Now I need to change the “Title 1” value in “Projects”. Why is this changed?

2
Jasper
Administrator
3 years ago
A
Captain
Andre te RaaCaptain
asked in Questions & Conversations

How can I enable the "Drop External Row" task in the scheduler?

I'm trying to implement the Drop External Row task in a calendar view (scheduler). When I look at the documentation, I can find the fields for the drop_date and the resource_id (see below), but I can't find the field for the name of the task. What name should I use?    

1
Roel
Moderator
3 years ago
R
Captain
Roy van UffelenCaptain
posted in Questions & Conversations

What does the following message mean

After importing changes in a program object from SSMS back into TSF I get the following message:What does this mean? Why do I get it? And should I be worried?PS I only seem to get it when there are multiple templates in a single control procedure and have multiple program objects in that control procedure.PPS Working in 2021.1 from 20210111

1
E
Moderator
3 years ago
cornevdlinden
Rookie
cornevdlindenRookie
asked in Questions & Conversations

Filter dropdown on result other dropdown

Hi, Is it possible to filter a dropdown (lookup) on a result from another dropdown in the same form? I have a form for a ticket. On this form I have a dropdown with departments. When I choose a department, I would like to filter the next dropdown with employees for the selected department. When I use a reference with department_id and employee_id, then the dropdown depends too much on the departments. I want to have a dropdown with all employees if I don’t select a department. Is this possible with a reference, filter, view?Can anyone help me?

2
cornevdlinden
Rookie
3 years ago
K.Bakkenes
Captain
K.BakkenesCaptain
asked in Questions & Conversations

Process flow application connector not working via an API call

In the testing phase of SF 2021.1 we tried to change a process flow from using the DB connector to the new Application Connector. However, we don't seem to get this working.See the process flow below.When calling the process flow via a POST from Insomnia, we see no results. The process flow stops at the Application Connector (see screenshot below). We expected to see the next process actions in the Indicum Universal DB event log. The input of the Application Connector is as follows:How does this Application Connector work? Are we missing something?

5
V
Moderator
3 years ago
K.Bakkenes
Captain
K.BakkenesCaptain
asked in Questions & Conversations

Process flow API settings SF 2021.1

In the process flow definition (of SF 2021.1) two settings are available for an API configuration: API switch and API alias. Our assumption is that these fields need to be configured to start the process flow as an API (Indicium Universal). However when trying to POST to the API alias we receive a 404 (not found) error. Posting (via Insomnia) to the original process flow name as an API does work. What is the purpose of these API fields?

3
K.Bakkenes
Captain
3 years ago
Tom van Druten
Warrior
Tom van DrutenWarrior
asked in Questions & Conversations

Universal - Task popup width

 A client asked me if it is possible to change the width of the task popup in universal.Because I’ve not worked with universal yet, I’d like to ask the question here. 

1
Erik Brink
Moderator
3 years ago
R
Captain
Roy van UffelenCaptain
asked in Questions & Conversations

Wizard

How do I build a wizard in TSF?

1
E
Moderator
3 years ago
R
Captain
Roy van UffelenCaptain
asked in Questions & Conversations

How to create help at column?

In a form I have multiple columns. Behind the field I want to place a question-mark or information-button that leads to column specific help information.How do I do this?

1
E
Moderator
3 years ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

Process flow behaviour on web - closes 'Edit' mode

Hi all,We have created a procces flow with a trigger on Edit Row. This to verify if some fields are modified, we check some things in the background. Anyway, in Windows this is all good. However, on WEB we have an unexpected issue (but it could be caused by something else...) Our table is spread on 3 tabs, but when you edit, and switch to another tab, Edit is closed (and all is saved). But I want to be able to edit all tabs, and this Auto saves/closing the Edit mode is annoying for our users.   The process flow that might cause this:Is this the expected behaviour for a process flow on Edit Row in Web? Or is something else going on? Anyone shine a light on this? Much appreciated! Alex   

1
Blommetje
3 years ago
mperrott
Hero
mperrottHero
asked in Questions & Conversations

Can we incorporate the google material icons into the index.html of Universal GUI ?

Hi,The requirement is simple.We have a view where we need to display a note on the screen for the usage of our buttons Tasks.The buttons tasks themselves are only an icon, taken from googles material.io .The note itself is a field of HTML domain and we placed the below:<p>Please contact us <i class="material-icons">contact_mail</i> if having second thoughts on approved <i class="material-icons">thumb_up</i> or disapproved <i class="material-icons">thumb_down</i> planning </p>The result should be something like this:In order to load the images in the note field, we added in the index.html header of the Universal GUI the line as instructed of:<link rel="stylesheet" href="https://fonts.googleapis.com/icon?family=Material+Icons"> In order for the images be incorporated within the text as shown in the image above. Unfortunately it is blocked. Any idea why ?

1
Jasper
Administrator
3 years ago
R
Captain
Roy van UffelenCaptain
asked in Questions & Conversations

formatted tooltip

I'm trying to include a formatted tooltip on a translation. I've seen that HTML-formatting is (or at least was) possible. Unfortunately in my current environment (2021.1 and Windows GUI) this doesn't seem to work.Tooltip in actionJust tried to include </br>, which result is better, but still not an unordered list:Am open to receive suggestions to formatting (un)ordered lists.And if not all formatting is supported to know which ones are.

4
R
Apprentice
3 years ago
Johan van Eijsden
Captain
Johan van EijsdenCaptain
posted in Questions & Conversations

Using uploaded XML file from task parameter results in error "Access is denied"

In our application there is a task “Importeren calculatiebestand (CUF-XML)” that should create a master record and multiple detail records based on the given task parameters.  The master record will be created based on the information underneath the header “Standaard optie” and the detail records should be created based on the content of the XML file. The XML data is imported with the following code:  EXEC (' INSERT INTO import_xml ( guid, bron, xml_data, volledige_bestandsnaam, ingevoerd_op, ingevoerd_door, gewijzigd_op, gewijzigd_door ) SELECT ''' + @import_xml_guid + ''', ''CUF'', xmldata, ''' + @bestand + ''', ''' + @datum_tekst + ''', ''' + @gebruikersnaam + ''', ''' + @datum_tekst + ''', ''' + @gebruikersnaam + ''' FROM ( SELECT * FROM OPENROWSET (BULK ''' + @bestand + ''' , SINGLE_BLOB) AS

5
E
Moderator
3 years ago
R
Apprentice
Ronald VHApprentice
posted in Questions & Conversations

Hotjar integration

Good afternoon, I am trying to integrate Hotjar with the web application we have built using the Software Factory.Hotjar records user sessions which  in its turn can be used to analyze these sessions.In order to make this work, we had to put a Javascipt code snippet into the <head> tag.All well, until I started to take a look at the recordings: the CSS in these recordings is all messed up after users have logged into our application. In other words, the recording seems to be fine up until the moment users have logged in.I have contacted their support department and they claim that I have to whitelist their IP and/or a particular domain (namely insights.hotjar.com). However, to me this seems to be a strange solution as the log-in screen appears fine in the recordings. P.S. I am not talking about the heatmaps that Hotjar offer (of which I already know that it isn't compatible with SPA's; https://community.thinkwisesoftware.com/development-13/heatmaps-851), but I am referring to the

1
E
Moderator
3 years ago
E
Sidekick
Edwin SaanSidekick
asked in Questions & Conversations

Optional parameter in stored procedures

As far as i can see, there is no option in the SF to define default values for subroutine parameters. When a default value could be defined they become an optional parameter in SQL server. Could this be an idea to add to the SF? The advantage is that you don’t have to define all parameters when calling a subroutine.Or what should be the reason that this option is not available?Or did I miss something and can it be done? 

2
E
Sidekick
3 years ago
mperrott
Hero
mperrottHero
asked in Questions & Conversations

Azure SQL Database for Software Factory

Wanted to ask if there is currently in the plans, or if it is working already to have the Database of the SF in Azure SQL ? A Goal we want to achieve, is to move everything to Azure, and as a first step just wanted to know from DB POV.From GUI POV I suppose an on-premise machine or Azure VM is still needed and required.

3
V
Moderator
3 years ago
P
Vanguard
PatrickW
posted in Questions & Conversations

Resource Scheduler - (Resize) actions doesn't execute

Hi,I am struggling with my first resource scheduler. For a new project I have created the necessary tables for the Resources and the Tasks/Appointments, as described in the Documentation (Resource Scheduler · Thinkwise Docs (thinkwisesoftware.com).So far so good, I have the tasks visible:But I can’t resize, move or double click the appointment, nothing happens. It look likes the scheduler is in Read only or something.These are my Extender settings, and I have also created a Task in the Model for the Resize-action.Resource settingsTask settingsResize actionResize taskScreentypeWhat have I forgotten or did I do wrong? The SF version is 2019.2.

3
Roel
Moderator
3 years ago
Blommetje
BlommetjePartner
asked in Questions & Conversations

Will vertical tabs be supported for web in the (near) future?

Hi,Any change this will be supported on web in the near future?  Alex

2
Blommetje
3 years ago

Badges

Show all badges
Terms & ConditionsCookie settings